Services

Services


The highly equipped computerized & digital laboratory has got all the facilities to conduct Physical tests on all types of building materials, as per relevant Indian Standard Code of practice.

Geotechnical Investigation :-

HTCTL has the capacity to perform types of routine and advanced Geotechnical investigations which are performed by geotechnical engineers  to obtain information on the physical properties of soil and rock around a site to design earthworks and foundations for proposed structures and for repair of distress to earthworks and structures caused by subsurface conditions. This type of investigation is called a site investigation. A geotechnical investigation will include surface exploration and subsurface exploration of a site. Sometimes, geophysical methods are used to obtain data about sites. Subsurface exploration usually involves soil sampling and laboratory tests of the soil samples retrieved.

To obtain information about the soil conditions below the surface, some form of subsurface exploration is required. Methods of observing the soils below the surface, obtaining samples, and determining physical properties of the soils and rocks include test pits, trenching (particularly for locating faults and slide planes), boring, and in situ tests.

  • Standard Penetration Test
  • Geological Surveys

Expansive Soils and Foundations

  • Safe Bearing Capacity
  • Ground Improvement
  • Expansive Soils and Foundation Problems

Non Destructive Testing :-

 Non-destructive testing (NDT) is a wide group of analysis techniques used in science and technology industry to evaluate the properties of a material, component or system without causing damage product evaluation, troubleshooting, and research.

HTCTL is equipped with Following NDT test facilities.

  • Rebound Hammer Test
  • Ultrasonic Pulse Velocity Test
  • Carbonation Test
  • Cover Depth Test

Construction Material Testingn :-

 Different types of materials are used for construction purpose. These materials need to be tested for quality and to get specifications. This quality of materials ensures stability of structure and specifications are used to get required amount of material.

HTCTL serves in material testing activities through the course of time by delivering reliable and accurate test parameters. All the tests are performed by a highly qualified and experienced team according to relevant Standards and Specifications.

  • Aggregate(Coarse and Fine)
  • Bricks
  • Bitumen
  • Cement
  • Fly Ash
  • Concrete
  • Soil
  • Rock
  • Steel
  • Cement Concrete Tiles
  • Gypsum Building Plaster
  • Concrete and Bituminous Mix Designs
  • Water
  • Sand
  • Paver Blocks
  • Admixture
  • Timber & Wood
  • Plywood & Ply Board

***Design Mix on all grades of concrete (M10 to M70) are undertaken for both Normal and     Accelerated Curing Tests (ACT) Method. Accelerated Curing Tests (ACT) - for Concrete Mix Design are undertaken to estimate equivalent 28 days strength. ACT-Mix Design Reports will be submitted within 4 days